Led street light wholesale manufacturer right now: IK stands for Impact-Kinetic. Similar to ingress protection, impact protection, or the IK rating, also tells a big story in a number. If an LED roadway light manufacturer mentions an IK09 rating in its product specs, the product has an impact resistance of 10 joules. It is equivalent to a 5-kg object dropping from 20cm in height. A typical roadway lighting LED consists of aluminum as the base material and acts as a heatsink. However, thermal pastes and pads play a vital role in ensuring the heat is conducted from the LED chip to the case and the driver and adequately dissipated to the environment. High-end street lights use high-quality and adequate quantities of thermal paste and padding underneath the substrate or PCB to ensure proper heat transfer. Similarly, the driver is also thermally bonded with the casing through adhesives, pads, and thermal pastes. There are a couple of things to look for in an LED roadway light: the body should be made of high-conductivity material, the design may include a fin-like structure outside, and all the heat-generating components should be heatsinked appropriately. Read extra info at led street light manufacturers.
Using aluminum provides lightweight, corrosion-resistant, versatile, heat-conductive, and recyclable designs for LED roadway light cases. A high-end LED roadway light will have a UV and water-resistive coating to improve longevity. The street light pole mount can be 60-76mm in diameter. The street light LED assembly must clamp onto the pole firmly. Manufacturers produce yoke, side entry, shoe, top entry, and suspended mounting mechanisms. These can be either aluminum or iron, depending on the design. In the case of iron, the mount can catch rust in high humidity and UV conditions. Aluminum is still the preferred mounting material for LED streetlights.
These are sodium vapor lamps that operate at internal pressure, usually above 1 atm, and temperature above 1000C. They contain xenon gas along with a sodium-mercury mixture enclosed in a ceramic tube. When an electric current is passed, the xenon gas ionizes to create an arc that heats the sodium mercury amalgam. The mercury vapors emit a bluish-white light, and the sodium vapors emit a golden-white light. These lamps offer higher efficacy and produce up to 150 lumens per watt of electricity consumed. They provide higher life spans, usually > 24,000 hours. However, it gives poor color rendering (distorts illuminated object color). They are typically used for street lighting and as advertising light on billboards, signs, parks, and monuments.
The power of the High Bay Led Lights is only 20% of the sodium lamp, which is equivalent to the 100W LED high bay lamp can replace the 250W sodium lamp, especially in line with the “green low carbon” proposed by the state. Applicable occasions: shipyards, mines, workshops, factories, warehouses, highway toll stations, gas stations, large supermarkets, exhibition halls, stadiums and other places where industrial and mining lighting is required.
Shanghai CHZ Lighting practices the standardized production and carries out strict quality control to ensure the best quality of LED street lights etc, saving time and cost for both parties and bringing the greatest benefits to customers. Founded in 2010, Shanghai CHZ Lighting Co., Ltd. is a high tech enterprise engaged in the research; and development, production and sales of LED lighting products. CHZ lighting fixtures have obtained many international quality certificates, including ENEC+, TUV, ENEC, CB, ROHS, UL, DLC, etc.
Because the LED garden lamp has the characteristics of versatility, aesthetics, landscaping and decorating the outdoor environment, it is also called landscape LED garden lights. It has the characteristics of energy-saving and high efficiency. It is mainly used for lighting up the urban slow lanes, narrow lanes, residential quarters, tourist attractions, public places such as parks and plazas, which can extend the time people spend in outdoor activities and improve the safety of properties. Applicable occasions: Widely used in urban roads, parking lots, bicycle lanes, gardens, plazas, residential areas and other outdoor venues.
Enclosure: Using efficient Fishbone radiator with elegant appearance. The die-cast aluminum housing is electrostatically sprayed, sprayed with a polyester powder coating, treated with an anti-corrosive primer, and cured in a 180oC oven. Cable: Using silicone rubber cable for safe and efficient power input. It is secured in the cable gland with screws. Warranty: 5 year warranty for the entire lamp. Do not attempt to disassemble the casing as this will break the seal and invalidate all warranties. Certificates: ENEC, TUV, and RoHS. Quality Control: Strict testings including high and low temperature testing, waterproof testing, shock testing, aging testing, tensile testing, salt spray testing, are conducted to ensure long-term performance. Find additional details at chz-lighting.com.
Most LED street lights are installed with a solar panel that helps in generating backup power hence reducing the operational costs incurred. In other words, instead of using electricity, most manufacturers install a solar panel in the lighting system to provide the required energy. Such lights have some added advantages, especially those that operate in areas that experience at least 10 hours of sunlight. The light source usually recharges its batteries and uses the energy to provide light at night. Such a system is paramount in ensuring that the street light illuminates an area throughout the year.
The price of smart street lights is relatively high. Although it is difficult to popularize in a short period of time, there are currently pilot projects in major cities, and it is believed that they will be popularized in the near future. CHZ believes that the indispensable importance of smart street lights to the construction of smart cities will make smart street lights very promising in the future market. LED street lights are exposed all year round, and are exposed to wind, rain, or even rain and snow, especially in places where heavy rains continue. Waterproofing is a very important issue for the use of LED street lights. To solve the waterproof problem of LED street lights, you can start from the following aspects.
The indoor table tennis room originally used 36 1000W lighting light boxes, the glare was serious and unevenly distributed, and the field illumination was less than 100lx, which was not conducive to the development of table tennis. In order to ensure the professionalism of table tennis lighting,CHZ-LIGHTING uses 124 36W professional anti-glare LED panel lights, which are made of special water chestnut plates, UGR<19, and are reasonably arranged above the venue. After testing, the average illuminance of the venue is above 300lx, the uniformity is above 0.6, the light is soft and bright, and there is no glare interference. The healthy eye-protecting light makes the eyes more comfortable.