Alloy rims provider in China? Due to the current modification of the shops, the original thought that the hub installation of So easy if you do not pay attention to the following installation details, or out of the control: No diameter reducer is installed: the vehicle may have jitters problem during daily running. Dynamic balance weight does not return to zero: when the vehicle is running at high speed, it may shake. No torque plate is used to tighten the hub manually: too loose the hub may be in danger of falling off, too tight may damage the nut/bolt. Tire specifications do not match the hub: tire wear is abnormal, and even the hub can not be installed or there is a rub problem. Read even more details at alloy wheel manufacturers.
Gravity casting wheels:This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.
Fuel vehicle: If you use fully synthetic engine oil, a small maintenance every 10,000 kilometers, a single cost of 600 dollar, then 100,000 kilometers need to be maintained 10 times, the total cost is 6,000 dollar, a major maintenance every 30,000 kilometers, a major maintenance Counting 1,000, 100,000 kilometers of maintenance 3 times, the cost is 3,000, so calculated, the total maintenance cost of 100,000 kilometers is 9,000 dollar.
One piece forged wheels,Milling and forging,The use of impact or pressure to deform the metal between the upper and lower two against the iron (anvil) to obtain the required block of blanks, blanks after heat treatment and then through the machining center milling and forming, a piece of relatively lighter weight, can achieve the most lightweight dynamic balance better reliability, no hidden gas leakage. The main advantages of steel hubs are simple manufacturing process, relatively low cost and strong resistance to metal fatigue. But the disadvantages are also obvious, such as heavy weight, large inertial resistance, poor heat dissipation and so on.
JWHEEL alloy wheel manufacturers adopt the industry’s advanced casting, spinning, machining, painting and inspection equipment, and at the same time, it is equipped with fully automated robot operation platform and testing equipment to fully meet the product requirements of major high-end customers. The company also sets up a professional team for new product development, design, mold manufacturing, trial production, testing and inspection to provide customers with technical development and support services. Find extra info on https://www.jjjwheel.com/.