Street lights supplier with chz-lighting.com: Cities are turning smart with better control over roadway lighting, protecting the environment and human health. A decrease in energy consumption through intelligent control can involve proximity sensors, timers, and solar detectors. It enables the city administrations to install more street lights, thus improving safety and security. However, not all LEDs have regulation capabilities. The LED needs to be dimmable with the following features: It is a dimming functionality that requires a compatible LED driver. It regulates the brightness of the LED or turns it ON/OFF based on a control signal that works between 0 and 10V. If 0V is supplied, the LED turns OFF, whereas 10V means maximum brightness. It requires connecting an additional control circuit for brightness control. Read additional details at led street light manufacturer.
What type of flood light is best suited for outdoor security? LED floodlights are best suited for security purposes. They are energy efficient, offer bright and clear lighting, and possess longer life hours. Do flood lights serve the purpose of indoor lighting? Floodlights offer high-lumen light intensity and are suited for large indoor spaces like warehouses, halls, metro stations, and indoor process industry spaces like turbine halls. Which Flood light rating is best suited for me? Each application has its own set of requirements. Large open spaces like a football field will require higher lumens ( >10,000 lm), whereas backyard or street lighting purposes require lesser lumens (2,000 to 3,000 lm).
The most frequently used metal halide is sodium iodide. As the electric arc increases gas temperature, sodium dissociates from the iodine, adding orange as the metal ionizes. Metal halide lights offer higher efficacy than their counterparts. They produce up to 75-100 lumens per watt of electricity consumed. They primarily use lighting applications like sports arenas, automotive headlamps, and public places. They take time to reach full operating conditions as the pressure and temperature inside the gaseous mixture tube take time to warm up. This period can be as long as five minutes. As the metal halide lamp ages, the outer glass tube becomes weakened due to operational heat stresses. The pressure inside the tube can reach up to 3.5 atm. The tube at the end of life usually breaks inside the outer glass casing. Generally, their life span is < 20,000 lumens.
LED tube energy saving is more than 70%, life is more than 10 times that of ordinary lamp (in theory, it can reach more than 50,000 hours), almost maintenance-free, there is no need to change lamp, ballast, starter frequently The problem can be exchanged for the cost saved in about half a year. The green and environmentally-friendly semiconductor electric light source has soft light and pure color, which is beneficial to people's vision protection and health. Applicable occasions: Hotels, shopping malls, schools, hospitals, factories and underground parking lots are widely used to replace traditional T5 fluorescent lamps.
CHZ Lighting helps customers choose the most appropriate led lighting products and offer corresponding technical supports after understanding their overall needs. Customers only need to provide us with some basic engineering information. (Take led street light as an example, the information customers need to offer includes road width, pole height, pole position, pole spacing, average illumination requirement, etc.) Based on the provided information, our designers can then use Dialux simulate lighting effects and offer multiple design options to customers.
LED garden lights are a kind of outdoor lighting. It uses a new type of LED semiconductor as the illuminant. It usually refers to the outdoor lighting that illuminates an area less than 6 square meters. Its main components include an LED light source, enclosure, pole, and flange. The disc and the basic embedded parts are composed of 5 parts. It is mainly used to light up large-area mines, building outlines, stadiums, overpasses, monuments, parks, and flower beds. In fact, almost all large-area lighting fixtures used outdoors can be regarded as spotlights. Applicable occasions: Suitable for shopping malls, exhibition halls, parking lots, playgrounds, gyms, parks, building facade and public corridor, stair corridor and other indoor and outdoor lighting.
Enclosure: Using efficient Fishbone radiator with elegant appearance. The die-cast aluminum housing is electrostatically sprayed, sprayed with a polyester powder coating, treated with an anti-corrosive primer, and cured in a 180oC oven. Cable: Using silicone rubber cable for safe and efficient power input. It is secured in the cable gland with screws. Warranty: 5 year warranty for the entire lamp. Do not attempt to disassemble the casing as this will break the seal and invalidate all warranties. Certificates: ENEC, TUV, and RoHS. Quality Control: Strict testings including high and low temperature testing, waterproof testing, shock testing, aging testing, tensile testing, salt spray testing, are conducted to ensure long-term performance. Read even more information at https://www.chz-lighting.com/.
If you are struggling to differentiate street lights from other light sources, take a look at some of the features used to identify them. You need to understand that street lights are commonly made of metals such as aluminum that are corrosion resistant. Alternatively, some of these street lights are made from a strong plastic material such as polyethene. The solar street light manufacturers have been factoring in the issue of withstanding outdoor elements when looking for materials to craft these lights. Most of them are pole- mounted on either existing utility poles or dedicated poles.
Waterproof problems in the installation of LED street lights: After ensuring the quality of the lamp holder, you need to pay attention to the technical problems of the lamp holder installation and construction. Most of the led street light controllers are installed in the lampshade and battery box, and generally will not enter water, but in actual engineering cases, some are due to improper installation or The circuit board of the controller is not treated with three-proof paint, which will cause a short circuit due to rain water flowing into the led street light controller along the external wiring of the controller terminal. Therefore, during construction, attention should be paid to bending the internal connecting wires of the controller terminals into a “U” shape and fixing them, and the connecting wires exposed to the outside are also fixed to a “U” shape, so that rainwater cannot enter and cause the controller to short circuit. You can also apply waterproof glue on the inner and outer line interfaces to waterproof.
After the lighting renovation of these venues is completed, the lighting effect has been greatly improved, and it has also been highly praised by the teachers and students of the whole school. Next, the CHZ-LIGHTING team will carry out the lighting renovation work of other venues. In the field of sports lighting,CHZ-LIGHTING has accumulated rich experience in stadium lighting projects with the help of high-quality lighting products and professional service capabilities, and has created many classic project cases all over the country. In the future,CHZ-LIGHTING will continue to cultivate with a more professional attitude, constantly temper its own innovation core, and bring a new lighting experience to more stadiums and sports events by creating professional sports lighting lighting design.