Quality welding supplies online store UK: Mobile welding fume extraction systems are designed to be wheeled around facilities as needed to sources of pollution without a fixed location. Mobile fume extraction units can come in light, medium, or heavy-duty variants. Medium and heavy-duty mobile systems are available with disposable filters or self-cleaning filters. The MFD/MFS are mobile fume extractors, designed to remove dry welding fumes near the source. These mobile units contain a mechanical DuraFilter system and come standard with the UltraFlex extraction arm. The MFD and MFS come standard equipped with a filter indicator which shows whether the filter needs to be replaced. Read even more details at Welding Equipment.
Improved Equipment Longevity – Welding activities produce more than smoke – they also create dust and dirt that can build up on machines over time and cause them to deteriorate faster. A top-notch fume extractor filter helps lessen the volume of substances collected on equipment surfaces. This helps extend the life of machinery by cutting down on maintenance expenses and downtime. Investing in filtration systems for welding operations safeguards your resources and guarantees smoother overall functioning.
Welding is a vital process in many industries, but it involves significant hazards that can pose risks to health and safety. Understanding and implementing rigorous safety protocols is not only a responsibility, it’s an essential part of every welder’s daily routine. These measures help prevent accidents, reduce injury risks, and ensure a safer workplace for everyone involved. Welders face various dangers including burns from hot metal and sparks, eye damage from ultraviolet and infrared rays emitted during welding, respiratory issues from inhaling fumes and gases, and risks of electric shock. Each hazard requires specific precautions to protect the health and safety of welders.
The use of heat and management of that heat varies between processes. Arc welding has to pay close attention to heat. Too much heat is bad and can burn through or destroy a workpiece. Too little heat makes for an ineffective weld. Heat treatment can strengthen a joint after the welding, and welding heat-treated materials can remove that heat treatment. Moreover, the heat gradient through the workpiece can contribute to warping and damage, so preheating and slower cooling can be necessary to prevent distortion. Brazing benefits from preheating to help ensure that the filler material is properly wicked up into the materials and wets across surfaces for a robust connection. While it’s not strictly necessary, it’s good practice to preheat the work area before melting filler into it. No heat treatment after the brazing is necessary or even desirable. Soldering can benefit from some preheating, but it depends heavily on the purpose and physical needs of the joint. It’s often not necessary. Further, no post-process heat treatment is necessary.
At the very high end, you can find welding helmets that take measurements of your head and are custom-made just for you. Truthfully, these are more expensive gimmicks than they are useful; you don’t need that added expense when an adjustable helmet is just fine. How much does it weigh? The heavier a helmet is, the harder it is to wear for longer periods without causing yourself problems, including neck strain, headaches, muscle tension, and more. A lighter helmet is better, but lighter helmets tend to have fewer features and less protection. The ones with the most features that are still lightweight tend to be more expensive. Generally, go for the lightest weight that still has the features you want at a price point you can afford.
This is a professional MIG welder by Lincoln Electric with brass-to-brass connections, solid metal wire drive and a 220v / 240 volt input. Every feature is of professional quality. The case is much thicker metal than the Chinese machines, the circuit board is enclosed and it uses stainless steel hinges. These details matter when you put food on the table with your welder. With a welding range between 30 and 180 amps, the Easy MIG 180 can weld on everything from thin sheet metal on a car grille all the way up to frame modifications on the same vehicle, including metal up to ½-inch thick. At 130 amps, the duty cycle is 30 percent, making it unlikely you’d ever reach the point for most jobs where the automatic thermal shutoff kicks in. The Easy MIG 180 comes with a Harris regulator and the gun has a 10-foot connection. Lincoln Electric has an arc-starting technology that’s almost completely spatter-free, giving you time to dial in just the right settings for the task at hand. Lincoln includes both gasless and MIG nozzles, backing the Easy MIG 180 with a 3-year warranty.
Do you feel frustrated because the disc grinder work is not progressing well, or you are running out of time? If that is your problem, then this Metal Cutting Disc will help you. It is a high-quality product that has been designed to provide ultimate performance. The wheels are made of steel and have a tooth count of 25. They are great for concrete, metal, or other materials where you want to cut through tough materials quickly. These discs are made from high-quality cutting wheels with a flat shape. They have a 3? diameter and a 1/16? thickness. With ultra-thin metal and stainless steel, they can quickly and easily cut through burrs and other unwanted materials. With these discs, you can grind metal and stainless steel fast and smooth while minimizing noise. As a versatile option for workshops, the discs can be used with sheet metal, die grinders, air cut off tools, and electric cut off tools.
Delivery of parts to the welding station in an organized and logical fashion is also a way to reduce welding costs. For example, one company was manufacturing concrete mixing drums. In the fabrication process, the company produced 10 parts for one section, then went on to make 10 parts of another drum section, etc. As pieces came off the line, they were put onto the floor of the shop. When it was time to weld, the operator had to hunt for the pieces needed and sort through them. When the outside welding expert pointed out the amount of time being wasted in this process, the company started to batch each one on a cart. In this way, the pieces needed to weld one drum were stored together and could easily be moved to the welding area. This type of scenario is also true for companies that may outsource parts to a vendor. Though it may cost more to have parts delivered in batches, it may save more in time than having to organize and search through parts to be able to get to the welding stage. How many times each piece is handled in the shop may be an eye-opener to reducing wasted time. To measure such an intangible as this, operators are asked to put a soapstone mark on the piece each time it is touched – some companies are surprised to find out how many times a part is picked up, transported and laid down in the manufacturing process. In the case of one company, moving the welding shop closer to the heat treatment station eliminated four extra times that the part was handled. Basically, handling a part as few times as possible and creating a more efficient production line or work cell will reduce overall costs.
How to pick a welder tips: Fan on demand: Lowers running costs and reduces contamination to internal components. The fan kicks in when it’s needed, rather than running all day. Printed Circuit board protection: If the machine’s PCB’s are protected from dust & kept away from the fan, reliability will increase. Some manufacturers’ have the parts that need cooling in a duct type housing & the PCB isolated separately. Step voltage settings: If you’re looking at step voltage conventional MIG with multiple power settings – “the more the better!”
The 720 Watt, 6 Amp motor spins the cutting discs up to an impressive 11,000 rpm. That’s more than enough power output to get just about any job done with a 115 mm disc. Weighing in at less than 2 kg, it’s light enough to use one-handed if you’re brave enough. For two-handed use, there’s an indestructible plastic side handle that you can screw into either side. The thing I like about this handle is the 20° angle. You get a better grip for more precise grinding work, compared with standard right-angle grips. Another bonus feature found on this grinder is the soft start. For such a powerful bit of kit, it doesn’t feel like it’s going to jump out of your hand when you turn it on. And thanks to the anti-restart function, it’s safe to use as well.
A few advices on welding equipment, MIG and TIG welders, plasma cutters. A MIG welder uses a continually feeding spool of thin filler wire as an electrode fed by a wire feed gun to form an electric arc between a wire and the work-piece metal. This heats the work-piece metal and the electrode, causing them to melt and join together to create the weld. Mig welding can be either Gas or Gasless and each have benefits. Gasless welding is far more portable as there’s no gas bottle to carry around, saves cost on having to buy gas bottles and regulators, is easier on positional welds and can penetrate deeper than Gas MIG although the welding wire for a gasless MIG is more expensive than a gasless MIG. Gas MIG welding produces much cleaner welds with no slag or spatter, is slightly better on thinner metals and the welding wire is cheaper than gasless MIG wire.
MaxxAir HVHF 12COMBO Heavy Duty Cylinder Fan with 20-foot Vinyl Hose. Maxx Air has been producing high-quality ventilation systems since 1948 for industrial and residential areas. This cylinder fan is one of their powerful and efficient fume extractors that you can use anywhere you want. Extremely Lightweight and Industrial Finishing. This compact and lightweight machine weighs only 1.02 pounds despite its large size. It’s built with high-quality steel material that makes it sturdy and robust. With painted finishing and buttoned control, the air cylinder fan gives a vintage and industrial look. 2000 CFM Airflow and 20-foot Long Vinyl Hose. Maxx Air HVHF can efficiently replace any ventilation system that your workplace or residence has. It can generate 2000 CFM airflow with 120V power. The vinyl hose is 20 feet long and adjusted to a high-velocity blower.
The Skil 10 inch drill press is equipped with a 5-speed gearing system which makes it versatile. Thus speed variation can quickly be done for drilling with different bits, bit sizes, and materials. This is a manual belt adjusted for changing speeds. Skil 10 inch drill press is built with quality materials, and one of the best budget mag drill presses in the market available. This low price pick drill press powered with 120 volts. It has a five-speed function like 570, 900, 1390, 2050, 3050 rpm.
The story of ESAB is the story of welding. When our founder Oscar Kjellberg developed the world’s first coated welding electrode in 1904, he launched a company whose innovation and uncompromising standards have helped create the history of welding itself. For more than 100 years, ESAB has been powered by the will to continuously seek new and improved ways of serving our customers. This has made ESAB a world leader in welding products and advanced cutting systems. In 2012, ESAB was acquired by Colfax Corporation, one of the world’s leading diversified industrial manufacturing companies. Colfax, like ESAB, is a solidly customer-focused company that places strong emphasis on constant innovation and improvement. From the firsts by our founder to our global growth, we take pride in what we’ve accomplished in more than a century. But we do so with a keen eye on the future. What can we do better? It’s only when we seek to build upon all we’ve learned, to perfect the innovations our customers count on to work confidently, and push ourselves and our company further that we can boldly face the future. This is how we continue to write the history of welding and cutting. At the end of the day, it’s not where you’ve been that matters most – it’s where you’re going. And for us, that’s forward.
GPPH’s tables offer an incredibly stable and sturdy construction. The table top is made from 15MM thick material, this is outstanding when compared to the typical 6MM – 10MM that is usually used on lower end welding tables. In addition to this, the steel used is S355J2+N grade that is carefully selected. The steel is also unpickled so as to prevent the material becoming bright and causing arc to flash bounce off the table making the working conditions difficult for the welder. Finally, the tables are not coated with paint as it can make the surface difficult to conduct. They are coated with an oil based preparation which protects the tables during transport. Anti spatter is suggested.
If you’re a beginner welder but don’t mind splashing the cash for a top of the range welder, then try the Millermatic 141. Miller have really pushed the boundaries of usability with this welder and it features an auto-set feature for an easy set up, and infinite voltage and wire speed control. All you have to do is select the thickness of the metal you’re welding and you’re ready to start welding straight away. If you open up the machine you can tell that all the parts are great quality and really durable as well. There are more powerful welders on the market for the price, but there’s nothing better for welding up to 3/16 inch steel. See the full review here.
Out of a huge product range of the Dirty Pro Tools, we have found a top-grade MIG welder that turned out to be so good that we have decided to add it to this shortlist. It is the tool for welding metalware of medium thickness with the output range from 50? to 60?, best for sheets up to 2 mm thick. In addition, a pretty powerful converter of this welder allows working for about 6 minutes at 50?. So, you’ll be able to weld thin pieces for a good while, and the fan will provide a decent cooling of the tool. However, when the MIG welder overheats, the red light will flash telling you to stop welding and make a pause. By the way, you can pick either of 4 available amperage settings and adjust the wire feeding speed for reliable and straight welds. We were pleased by the package that includes a face shield, a clipping hammer, a brush and a spool of welding wire, so you can start welding right after unpacking the unit. So, this Dirty Pro Tools welder is one of the most affordable models for people seeking a mid-power machine to weld fine metal sheets.
UK market pick: LONGEVITY Inc is a company that has been around since only 2001. Like LOTOS Technology, it still produces a fine enough quality welder that it has earned its spot on this list. Besides the gas cylinder, this welder comes with everything you need to get started and is simple to set up. With all this, along with its solid performance, this machine is marked at a fair price of under $400. Though it is manufactured in China, the LONGEVITY Migweld is still a quality welder. It is most well-adapted to light use. Compared to Miller and Hobart’s machines, the price is somewhat better without sacrificing much quality. It welds from 24 gauge to ¼ inches of steel. Flux core is available for this welder. The LONGEVITY can run at ten different voltage settings. As an added bonus, it has thermal overload protection like the LOTOS welder.
Important Industrial Gas Cylinder Safety Guidelines to Keep in Mind: Acetylene and oxygen are two industrial gases widely used across various industries. The cylinders accommodating these gases are designed with user’s safety in mind. However, that is not enough to ensure optimum safety in an industrial facility. The following factors will help ensure the same: Understand the Cylinder Properly: A personnel should be familiar with the potential risks and hazards associated with compressed gases while handling them. It is important to understand the properties of the gas filled within such as toxicity, flammability limits, and toxicity – Threshold Limit Value (TLV). Also, it is important to understand the hazards posed by gas at low temperature, high pressure or due to the physical state of the gas – non-liquefied or liquefied, etc. A personnel should read the contents of the label on the cylinder. If the label is missing or not easily readable, then the cylinder should not be used. In addition to improving a personnel’s understanding on oxygen cylinder safety or acetylene cylinder safety, he should be administered a proper plant safety training.
Finally, if you’re looking for a home welder, then you don’t necessarily need the most powerful machine on the market. Some people invest in MIG welders specifically to support their home-based projects, when they’re creating something new in the garage, or working on adaptions to pieces of machinery and furniture. The Clarke MIG151EN is designed for the DIYers who can’t afford to compromise on quality. Complete with professional specifications like a non-live torch and an extra-tough protective coating on the front and rear, the Clarke turbo MIG welding machine comes with everything you need to start welding at home. There’s a thermal overload protection system to give you complete peace of mind, as well as a very powerful wire drive motor included. Additionally, you’ll be pleased to know that all Clarke products comply with the highest quality of European and safety standards. As a winner of multiple third-party awards, Clarke offers a high-performance option for anyone searching for an arc welder for home use. The rotary power selection system also means that you can choose the level of performance you need with ease. Find more details on this website.
Friction welding is a solid-state process that uses, as the name suggests, friction to fuse metals together. Unlike most welding processes, it doesn’t use a welding torch, welding rods or a shielding gas to create welds. The process only uses the heat generated from high rotational, vibrational or lateral contact speeds between two clean metals to create a bond. The metal residue formed during this procedure is removed after the cooling process. The welding equipment used in friction welding is more eco-friendly than other methods as it doesn’t emit harmful welding fumes or release toxins into the atmosphere. Its simplicity makes it a great option for welding drill bits, connection rods, axle tubes and valves.