Alloy wheel wholesale manufacturer with jjjwheel.com? Our products(such as forged wheels) are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets. They are now widely exporting to all over the world. If you are looking for a custom alloy wheel manufacturers, JWHEEL is your best choice, as one of the best alloy rims manufacturers. We have formed a complete testing system from the incoming inspection of raw materials to the factory inspection of finished products, and our testing capabilities range from material and performance to dimensional and impact and fatigue testing, and then to the testing of the coating performance of finished wheels. Find additional information on custom alloy wheels.
One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.
If the price of the car is not much different from that of the fuel car, you can choose it, but from the perspective of the current market models, the general car price is more than 20,000 higher than the fuel car of the same level. If you consider the economic cost, it is not recommended to choose a fuel-electric hybrid verb: move. Plug-in hybrid models, the battery life is generally less than 100 kilometers, and the fuel is used when the battery life is exhausted. The price of the car is also much higher than that of the same-level fuel car, but like pure electric vehicles, you can enjoy the green card treatment, only Considering the economic cost, it is also recommended that the higher car price is far more than the extra money for fuel.
The advantages of alloy wheels are light weight, high manufacturing precision, high strength, low inertial resistance, strong heat dissipation capacity, good visual effects, etc. The disadvantage is that the manufacturing process is complicated and the cost is high. The aluminum wheel hub is the product of “lightweight”, “high speed” and “modernization”, because it has many characteristics that are unmatched by steel wheels: Light weight and obvious energy-saving effect: It is well known that reducing the weight of the vehicle can save fuel, and the wheels located in the driving part with the lowest center of gravity of the vehicle are even more important to reflect the energy-saving effect of the vehicle.
Flow formed wheel manufacturing process first requires processing the blank with low-pressure casting, then heating the wheel blank, while gradually extruding the final form by rotating the press through the machine. Under the appropriate temperature and pressure of the press, the metal molecules are more dense and fibrous, which can bring higher strength and toughness than low-pressure casting, and the rim after spinning has a thinner cut, so the overall weight of the wheel is reduced. Welcome to inquire about wholesale flow formed wheel price, JWHEEL is the best choice of forged wheels manufacturers. Find even more information at https://www.jjjwheel.com/.